Tuesday 3 February 2015

Create Your Own Glass


Fused glass platter

Have you ever wanted to make your own fused glass platter, dish or wall piece? I offer individual tuition at my studio in Silsden, West Yorkshire to enable you to make a stunning piece of glass to your own design. 

Glass plate after the first firing

I design, cut and clean all my glass prior to placing it on the kiln shelf for fusing. Most of my glass goes through 2 days of kiln firing (coasters up to four) to achieve the finish that I like - a slightly raised design but all edges are well rounded.

Glass plate on platter slump mould

Once the glass is fully fired it is washed to remove any resideue of kiln wash and then placed onto a ceramic slump mould. The piece is then fired at a lower and slower rate so that it slumps down into the mould and takes the shape of the platter. This is always the exciting bit - opening the kiln to see the finished dish. Some glass fusers will grind the edges of the dish and refire it to "polish" the edges but if your firing schedule is slow enough this isn't necessary.

Slumped platter stll in the mould

If you would like to visit the Glassprimitif studio and make a large glass platter or wall piece you can contact me HERE. No previous experience of glass fusing is necessary and all materials are provided and refreshments too (but bring a packed lunch).

£150 full day - 10am to 5pm


No comments:

Post a Comment

Please add your comments - I love to hear from you.